top of page

Our top selling 3D resin cleaner has been formulated to ensure prints are subject to the highest quality cleaning process whilst maintaining their form, colour and quality. This crystal clear cleaner will remove both excess polymer and uncured resins from your print, without causing any discolourtation or ghosting.


This cleaner also benefits from the use of low odour, biogradable materials making it the ideal cleaner for both hobbyists and professionals alike. 


  • Instructions for use

    Fill a suitable container with the clear resin cleaner before submerging the printed model.

    Allow around 10-12 minutes in the cleaner bath, gently moving the model every 2-3 minutes allowing any excess resin to separate and dissolve.

    Once the model has been removed from the cleaner bath it can be gently rinsed with water.

  • Delivery

    In stock and available to dispatch on overnight delivery if ordered before 3pm. Postcode and area restrictions apply.

  • Technical Specifications

    • Viscosity, dynamic  - ca. 4 mPa.s (25°C)
    • Viscosity, kinematic - 4.55 mm2/s (20°C)
    • Density - 0.539 g/cm3 (20°C)
    • Water Solubility  - (25°C)
    • Flash Point  - 75°C (1013 hPa)
    • Colour  - Clear, Colourless
bottom of page