Pro Max is ideal for the cleaning of extrusion tooling and accessories including nozzles, pins and dies. The cleaner has been formulated to dissolve and remove a range of resins including PLA, PET & PET-G.
Ideal for industrial tooling and machinery, Pro Max helps remove cured and built-up resin deposits.
*Note!*
We always recommend the use of full safety equipment when using Pro Max cleaner including gloves, safety goggles and breathing apparatus. Please consult the safety data sheet before use.
3D RESIN CLEANER PRO MAX
Instructions for use
Pro Max can be applied to tooling with the use of an abrasive brush or scourer. Work the cleaner into the tooling until the resin begins to loosen, repeat this stage until all resin has been removed.
Alternatively, for resins which have dried or collected over a longer period the tooling can be place into cleaner bath.
Fill a suitable container with the pro max resin cleaner before submerging the tooling;
Allow around 1-2 hours in the cleaner bath before repeating the above process. Either of these cleaning methods can be repeated until the dried resin dissolves and becomes removable.
*Note!*
We always recommend the use of full safety equipment when using Pro Max cleaner including gloves, safety goggles and breathing apparatus. Please consult the safety data sheet before use.
Delivery
In stock and available to dispatch on overnight delivery if ordered before 3pm. Postcode and area restrictions apply.
Technical Specifications
- Viscosity - 2.2 mPa.s (Cp) (20°C)
- Density - 0.941-0.951 g/cm3 (20°C)
- Melting Point - <- 26°C
- Water Solubility - 9% wt min(20°C)
- Flash Point - 43°C min
- Colour - Clear, Colourless